Computer Problems | Coyote
If your computer does not close at all inside, then first check whether your computer is plugged in, it is not unplugged the power cord and the computer or the power supply unit (PSU) switch is not turned OFF position (O), which may be, for example, institut zemun polje by moving institut zemun polje the computer / return of repair. You can also see if everything is fine with the computer directly to the power button, as seen in practice is specifically a computer housing models, which sometimes breaks down the power button inside the plastic frame and pressing the power button, nothing will happen. If this does not help, then we can assume that the computer is possible institut zemun polje to change the power supply institut zemun polje unit.
If the computer is turning on, but will not start normally, institut zemun polje then you can turn off your computer, break open the casing and check all the wires / contacts institut zemun polje are securely pinned. For example, if your graphics card is not screwed on to the computer institut zemun polje casing with a screw, then the leg accidentally grabs the monitor cable and moves the video card, you can "get" a black screen at the computer is turned on. Especially important to check all is when the computer has changed some part of the computer was shipped. If visually it looks like all the wires / contacts are securely pinned, but the computer has changed the part, then try to make a thorough pārspraust new.
If the computer is turning on, but will not start normally or running problems, then apskatāmies computer power supply or fan at all turns. If the fan is running, then unlatched the computer casing and apskatāmies, or turns the processor cooler fan. If everything is OK, then another apskatāmies, or video card fan turns, if your graphics card is. If any of the fans is not spinning or turning, causing too much noise, then it must be replaced.
Non-standard institut zemun polje case, which can also be security after check is the motherboard institut zemun polje capacitors view, and open the power supply and also view the capacitors. It is possible that a capacitor is a little institut zemun polje virpuse izliekusies up (visually very unspoken comparison with the other), which indicates the capacitor problems.
A separate problem related to the computer power supply and CPU cooler are dust. If your computer is several years old and is located in a dusty environment, institut zemun polje then apskatāmies power supply and CPU cooler and visually appreciate how much dust has accumulated there. If a lot, then remove the power supply unit, carefully unlatched institut zemun polje and gently blowing in the breeze. Accordingly, the same is also made to the processor cooler fan.
CPU cooler fan can be removed as follows: Intel processor socket institut zemun polje (socket) 478 standard fan is two fold raked clips, Intel 775 processor socket standard institut zemun polje fan is rotated slightly with a screwdriver 4 potted clips clockwise and the clips can be pulled out. Before the imposition of the processor cooler back on it cleaned the old Thermal and on the lower parts are somewhat new Thermal should be applied in a thin layer. Imposing an Intel processor socket 775 standard fan clips are jāiestiprina order diagonally to avoid difficulties plugged into the last clip.
We can try to restore the BIOS (Basic Input / Output System) default settings, if the BIOS before institut zemun polje any changes. Startējoties computer at the beginning ready press one of the keys F2, Delete or F1 (IBM / Lenovo) institut zemun polje to start the BIOS. Then choose to restore the BIOS default settings to the command institut zemun polje of the various BIOS may be slightly different, such as "Load Fail-Safe Defaults" institut zemun polje or "Load institut zemun polje Optimal Defaults", and confirm by pressing the F10 key to save the changes. If your computer startējoties, BIOS generally not available, then we can try to shut down the computer, open the hull and on the motherboard to find a small, circular institut zemun polje BIOS battery, which is carefully removed out after a few seconds and put back. Taking out the battery, motherboard BIOS return to the default settings.
Check computer part temperature. Startējoties computer at the beginning ready press one of the keys F2, Delete or F1 to start the BIOS. Look at the BIOS PC Health Status section (Award BIOS) or Advanced section - Hardware Monitoring (Intel BIOS). Of course, the section institut zemun polje names may be different in different BIOS versions. The processor or CPU normal temperature should be between 35 and 50 degrees Celsius.
If Windows operating system starts, but the computer is working with the problems, then we can download SpeedFan institut zemun polje program you install, start-up and look at what temperature: the processor, or CPU (normally 35-50 degrees), hard disk, or HD0 (normally 35-50 degrees), graphics card or VGA (do not know exactly if> 80, then the time will not be good). If the temperature of a part is too high, then think about how to improve the same part of the computer case cooling or ventilation.
Note: The computer part temperature is not 100% safe and can vary slightly, for example, may be incorrect temperature readings (such as SpeedFan CPU readings is desirable to compare the BIOS CPU tempera
If your computer does not close at all inside, then first check whether your computer is plugged in, it is not unplugged the power cord and the computer or the power supply unit (PSU) switch is not turned OFF position (O), which may be, for example, institut zemun polje by moving institut zemun polje the computer / return of repair. You can also see if everything is fine with the computer directly to the power button, as seen in practice is specifically a computer housing models, which sometimes breaks down the power button inside the plastic frame and pressing the power button, nothing will happen. If this does not help, then we can assume that the computer is possible institut zemun polje to change the power supply institut zemun polje unit.
If the computer is turning on, but will not start normally, institut zemun polje then you can turn off your computer, break open the casing and check all the wires / contacts institut zemun polje are securely pinned. For example, if your graphics card is not screwed on to the computer institut zemun polje casing with a screw, then the leg accidentally grabs the monitor cable and moves the video card, you can "get" a black screen at the computer is turned on. Especially important to check all is when the computer has changed some part of the computer was shipped. If visually it looks like all the wires / contacts are securely pinned, but the computer has changed the part, then try to make a thorough pārspraust new.
If the computer is turning on, but will not start normally or running problems, then apskatāmies computer power supply or fan at all turns. If the fan is running, then unlatched the computer casing and apskatāmies, or turns the processor cooler fan. If everything is OK, then another apskatāmies, or video card fan turns, if your graphics card is. If any of the fans is not spinning or turning, causing too much noise, then it must be replaced.
Non-standard institut zemun polje case, which can also be security after check is the motherboard institut zemun polje capacitors view, and open the power supply and also view the capacitors. It is possible that a capacitor is a little institut zemun polje virpuse izliekusies up (visually very unspoken comparison with the other), which indicates the capacitor problems.
A separate problem related to the computer power supply and CPU cooler are dust. If your computer is several years old and is located in a dusty environment, institut zemun polje then apskatāmies power supply and CPU cooler and visually appreciate how much dust has accumulated there. If a lot, then remove the power supply unit, carefully unlatched institut zemun polje and gently blowing in the breeze. Accordingly, the same is also made to the processor cooler fan.
CPU cooler fan can be removed as follows: Intel processor socket institut zemun polje (socket) 478 standard fan is two fold raked clips, Intel 775 processor socket standard institut zemun polje fan is rotated slightly with a screwdriver 4 potted clips clockwise and the clips can be pulled out. Before the imposition of the processor cooler back on it cleaned the old Thermal and on the lower parts are somewhat new Thermal should be applied in a thin layer. Imposing an Intel processor socket 775 standard fan clips are jāiestiprina order diagonally to avoid difficulties plugged into the last clip.
We can try to restore the BIOS (Basic Input / Output System) default settings, if the BIOS before institut zemun polje any changes. Startējoties computer at the beginning ready press one of the keys F2, Delete or F1 (IBM / Lenovo) institut zemun polje to start the BIOS. Then choose to restore the BIOS default settings to the command institut zemun polje of the various BIOS may be slightly different, such as "Load Fail-Safe Defaults" institut zemun polje or "Load institut zemun polje Optimal Defaults", and confirm by pressing the F10 key to save the changes. If your computer startējoties, BIOS generally not available, then we can try to shut down the computer, open the hull and on the motherboard to find a small, circular institut zemun polje BIOS battery, which is carefully removed out after a few seconds and put back. Taking out the battery, motherboard BIOS return to the default settings.
Check computer part temperature. Startējoties computer at the beginning ready press one of the keys F2, Delete or F1 to start the BIOS. Look at the BIOS PC Health Status section (Award BIOS) or Advanced section - Hardware Monitoring (Intel BIOS). Of course, the section institut zemun polje names may be different in different BIOS versions. The processor or CPU normal temperature should be between 35 and 50 degrees Celsius.
If Windows operating system starts, but the computer is working with the problems, then we can download SpeedFan institut zemun polje program you install, start-up and look at what temperature: the processor, or CPU (normally 35-50 degrees), hard disk, or HD0 (normally 35-50 degrees), graphics card or VGA (do not know exactly if> 80, then the time will not be good). If the temperature of a part is too high, then think about how to improve the same part of the computer case cooling or ventilation.
Note: The computer part temperature is not 100% safe and can vary slightly, for example, may be incorrect temperature readings (such as SpeedFan CPU readings is desirable to compare the BIOS CPU tempera
No comments:
Post a Comment